Hello!
We would like to install SAP Solution Manager 7.1 SP8 on Windows 2008 R2 with Oracle.
Which installation software should be used therefore SAPINST or SWPM?
If SWPM, what are the advantages here?
Thank you!
↧
Solution Manager 7.1 installation: SAPINST vs. SWPM
↧
SOLMAN 7.1 send Earlywatch Alert via email
Hello,
In Solution Manager 7.1 how do I configure EarlyWatch Alert reports so they are sent to a specific email address?
I remember stumbling across this feature somewhere but can’t seem to find it again.
↧
↧
Solution Manager 7.1 assistance on the System Prep and Basic Configuration
Hello Expert Basis,
I'm in need of your expert advise on configuring Solution Manager 7.1.
Under the System Prepration section I have 2 questions I need additional clarification:
1. Under 6.2 Prepare Outside Discovery -> Establish trusted connection-> /usr/sap/hostctrl/exe/host_profile of solution manager server:
a. I added service/admin_users = daaadm. Am I suppose to include the password? what should the formate be?
2. Under 6.3 Connect Diagnostic Agent -> ran the following command on my ECC server:
./smdsetup.sh managingconf hostname:"solutionmanager.FQN" port:"50004" user:"ddaadm" pwd:"password1"
a. Is the user/password referring to SolutionManager admin account?
b. How do I check if it's running correctly?
c. How to get my solution manager to see my Ecc server's diag agent?
Under the Basic Configuration section I have 2 questions I need additional clarification:
1. Solution Manager Internal Connection -> Create RFC connectivity (WEBADM):
The TCP/IP RFC 'SOLMANDIAG' was successfully created or updated on ABAP side
The TCP/IP RFC 'WEBADMIN' was successfully created or updated on ABAP side
Failed to create or update J2EE WEBADMIN RFC
!! Exception : Caller SUPER not authorized, only role administrators is allowed to access JMX(cause=java.security.AccessControlException Access denied (javax.management.MBeanPermission -#getConfiguration[:SAP_J2EECluster="",SAP_J2EEClusterNode=9673150,j2eeType=SAP_J2EEServiceRuntimePerNode,name=rfcengine] invoke))
I checked the following:
Start Visual Administrator and navigate to: Server node -> Services -> Security Provider. Please also make sure that the MBeanAdmin is mapped to the Administrators Security role on both: com.adobe/AdobeDocumentServicesADS-EJB and com.adobe/DocumentServicesLicenseManagerADS-License
I don't see the Adminstrator role to add to the above. Am I suppose to just enter "administrator"?
2. Solution Manager Internal Connection -> Setup DPC/DCC Web Service URL
a. I'm supposed do the following: You have started the Agent Administration:
b. How do I start the Agent Administration?
My advance apologies for so many questions. I'm at a time crunch and in need of immediate help.
Any advise would be greatfully helpful.... thanks.
Edited by: SCC_Basis on Nov 21, 2011 8:33 AM
↧
where can i download Wily Introscope Enterprise Manager inst guaid
where can i download Wily Introscope Enterprise Manager inst guaid,can anyone help me.
↧
EEM setup
Hi
Finally I had started my configuration on EEM-setup
But the first issue I am facing in 2.4 Configure Automatically- I had executed all
All the green but Create logical ports and Create Web service Notification users are red
For - Create logical ports it says: in Display
This activity creates logical ports for the web service communication between the ABAP and JAVA stack of SAP Solution Manager.
1. Start transaction SOAMANAGER.
2. Create a logical port for consumer proxy EemAdminVi_Document.
3.
Enter user credentials, host and URL access path = /EemAdmin/Config1?style=document.
111.
what details need to give here?
2.Create Web Service Notification User the use is already created SM_EXTERN_WS
INTERNAL.SYSTEM_NOT_CONFIGURED_AS_XMB System not configured as XI Integration Engine
Please help me here
Regards,
Neni
↧
↧
SAP working directory
Hello SAP experts,
I would like to know where we could find the sapworking directory. I tried going to the path provided by google and SAP (C:\Documents and Settings\<User ID>\SapWorkDir\) but no the path does not exist.
Please advise. Thanks!
regards,
Grace
↧
SOLMAN 7.1 send Earlywatch Alert via email
Hello,
In Solution Manager 7.1 how do I configure EarlyWatch Alert reports so they are sent to a specific email address?
I remember stumbling across this feature somewhere but can’t seem to find it again.
↧
where can i download Wily Introscope Enterprise Manager inst guaid
where can i download Wily Introscope Enterprise Manager inst guaid,can anyone help me.
↧
Solution Manager 7.1 assistance on the System Prep and Basic Configuration
Hello Expert Basis,
I'm in need of your expert advise on configuring Solution Manager 7.1.
Under the System Prepration section I have 2 questions I need additional clarification:
1. Under 6.2 Prepare Outside Discovery -> Establish trusted connection-> /usr/sap/hostctrl/exe/host_profile of solution manager server:
a. I added service/admin_users = daaadm. Am I suppose to include the password? what should the formate be?
2. Under 6.3 Connect Diagnostic Agent -> ran the following command on my ECC server:
./smdsetup.sh managingconf hostname:"solutionmanager.FQN" port:"50004" user:"ddaadm" pwd:"password1"
a. Is the user/password referring to SolutionManager admin account?
b. How do I check if it's running correctly?
c. How to get my solution manager to see my Ecc server's diag agent?
Under the Basic Configuration section I have 2 questions I need additional clarification:
1. Solution Manager Internal Connection -> Create RFC connectivity (WEBADM):
The TCP/IP RFC 'SOLMANDIAG' was successfully created or updated on ABAP side
The TCP/IP RFC 'WEBADMIN' was successfully created or updated on ABAP side
Failed to create or update J2EE WEBADMIN RFC
!! Exception : Caller SUPER not authorized, only role administrators is allowed to access JMX(cause=java.security.AccessControlException Access denied (javax.management.MBeanPermission -#getConfiguration[:SAP_J2EECluster="",SAP_J2EEClusterNode=9673150,j2eeType=SAP_J2EEServiceRuntimePerNode,name=rfcengine] invoke))
I checked the following:
Start Visual Administrator and navigate to: Server node -> Services -> Security Provider. Please also make sure that the MBeanAdmin is mapped to the Administrators Security role on both: com.adobe/AdobeDocumentServicesADS-EJB and com.adobe/DocumentServicesLicenseManagerADS-License
I don't see the Adminstrator role to add to the above. Am I suppose to just enter "administrator"?
2. Solution Manager Internal Connection -> Setup DPC/DCC Web Service URL
a. I'm supposed do the following: You have started the Agent Administration:
b. How do I start the Agent Administration?
My advance apologies for so many questions. I'm at a time crunch and in need of immediate help.
Any advise would be greatfully helpful.... thanks.
Edited by: SCC_Basis on Nov 21, 2011 8:33 AM
↧
↧
Wily Enterprise Manager and SolMan 7.1 SP4
Hello,
we had a Solman 7.01 with a running Wily EM 8.2.3.5. We upgraded our SolMan to 7.1 SP4 and I would like to move to Wily EM 9.1.0.0. But I am running in some trouble - hope I can get some hints here:
1) Old EM was installed in /usr/sap/PS1/ccms/wilyintroscope. Wily_Introscope_V9_Installation_Guide_for_SAP.pdf tells me to install EM 9 to /usr/sap/ccms/apmintroscope. I did this successfully - EM is installed an running. But: When I call Introscope Workstation from Workcenter I get the message that all configured Enterprise Managers are offline. When I got the the url http://<solman>:8081/workstation?host=<solman>&port=6001 wily starts and I can see the triages etc.
So I think that something is wrong with my config but I can not get solman_setup to take my values - I tried "Import existing installation" a few times - without success. (Maybe I should install to the old directory wilyintrosope - but if it is changed there should be a reason [btw: what is the reason?] and I would like to follow the standard ...)
2) I saw that with SolMan 7.1 SP4 you can do a remote installation of wily EM. Did anybody succeed with that? I run in the problem that ca-eula.txt is not valid because it is not accepted - but definitly I changed reject to accept.
Thanks for any hints!
Frank E. Seidel
↧
Wily Introscope agent configuration
Hi,
If one of you can help me with some advices about how to configure Wily Agent on my Solution Manager.
First I want to let you know all steps that I performed until now:
1. Configuring SM (Solution Manager) using TX Solman_setup
2. Using [Wily Introscope Guide|https://websmp105.sap-ag.de/~sapdownload/011000358700001995842008] I performed the followings steps:
2.1. Installed Wily Enterprise Manager, started and this working fine (I am able to connect using Wily Workstation) on SM
2.2. On SM (the same host as Wily Enterprise Manager) I performed the following steps in order to install Wily agent
2.2.1. First I tried to install this agent using automatic method:
a. Enabled Maintenance Mode on SMD from TX solman_workcenter>Overview>Common Tasks>Agent Administration>and here I checked the radio button Maintenance Mode
b. Deployed ISAGENTSMD801_01-10007435.SCA using SDM (/usr/sap/ZSP/DVEBMGS00/SDM/program/RemoteGui.sh)
c. Disable Maintenance Mode on SMD.
d. According to Wily Introscope Guide at page 19 when I try to go to Diagnostics Setup Managed Systems
Introscope Agent here I am not able to see the agent running. In my case the agent has the red flag (SMD agent is not running).
e. Ca you tell me what if there I have to do another configuration than the steps listed in Wily Introscope Guide?
I think my Wily Introscope agent in not running, but I don't know exactly what I have to to to start up this agent.
f. Can you please tell me the difference between SMD agent and Wily agent?
2.2.2. If the above automatic SMD installation was not working I tried the manual installation listed at page 21.
a.I extracted the ISAGENTSTD02_0-10007435.SAR to /usr/sap/ccms
b.I changet the following in /usr/sap/ccms/wily/IntroscopeAgent.profile
introscope.agent.enterprisemanager.transport.tcp.host.DEFAULT=my IP address
introscope.agent.agentNameSystemPropertyKey=ZSP_Wily_Agent
c. I configured the JVM AutoProbe.
Because my JAVA is IBM Java VM 1.4.2 (SR1x) x86_64 I followed the note 1149214 to create Create AutoProbe Connector, and after that I added the following JAVA parameters using configtool in: cluster-data>Instance_ID42052>server_ID42052>General (tab)>Java Parameters
-Xbootclasspath/p:/usr/sap/ccms/wily/connectors/connector.jar:/usr/sap/ccms/wily/Agent.jar
-Dcom.wily.introscope.agentProfile=/usr/sap/ccms/wily/IntroscopeAgent.profile
-Dcom.wily.introscope.agent.agentName=ZSP_Wily_Agent
-Dcom.wily.autoprobe.prependToJVMRuntimePath=/usr/lib64/jvm/java/jre/bin/j9vm/jclSC14/classes.zip
d. After I added the bellow parameters and restarted the JAVA stack using TX SMICM>Administration>J2EE Instance local > Send Soft Shutdown>With Restart my JAVA engine didn't started, but if I will remove the above parameters the JAVA engine start up fine.
Can you please correct if I am wrong in my above steps that I performed in order to install and configure WIily Introscope Agent on my Solution Manager host. And can you please give me the complete steps that I have to do in order to have this agent running fine?
Thank you,
best regards,
Florin Radulea
↧
Solution Manager Transaction Code
Hello Gurus,
1. Where can I get a list of SAP Solution Manager transaction codes?
2. Is it true that SAP Solution Manager and SAP CRM transaction codes are almost same?
Regards, Nabi.
↧
UNABLE TO CREATE CLIENT IN SOLMAN7.1
Hi
iam unable log ing with created client , i got error . unable to log in ..
with 001 client i created and assign logical system , but unable to login with new created client
regards
vreddy
↧
↧
Log. Component XXX: Log System XXX:XXX has no RFC destination - Solman 7.1 SP 10
Hi All,
The follwing error message is obtained while testing "System Landscape" in Tx solar_project:admin in Solman 7.1 SP10 (Win/Sql Server):
Even when procedure is indicated in the above message, I´m not able to figure it out. I'm not able to find exactly where a RFC is linked to the logical system. A read RFC exists under "Solution Manager Configuration" workcenter, in "Managed System Configuration" section: Its connection test works ok. Actually I'm able to check that RFCs under "destinations" in both logical components and product systems areas in Tx LMDB.
Could you please guide me to the procedure should I use to get this RFC working?
Thanks and regards
↧
Solution Manager Transaction Code
Hello Gurus,
1. Where can I get a list of SAP Solution Manager transaction codes?
2. Is it true that SAP Solution Manager and SAP CRM transaction codes are almost same?
Regards, Nabi.
↧
SOLMAN 7.1 send Earlywatch Alert via email
Hello,
In Solution Manager 7.1 how do I configure EarlyWatch Alert reports so they are sent to a specific email address?
I remember stumbling across this feature somewhere but can’t seem to find it again.
↧
Wily Introscope for SOLMAN 7.1
Hi All,
We are configuring SAP Solution Manager 7.1
I have few doubts regarding Wily Introscope.
1. Is it necessary to install Wily Introscope on SAP SOLMAN 7.1?
2. Is it installed already with SOLMAN or need to be installed manually?
3. I need details about licensing policy of Wily Introscope.
4. If it is necessary to install please provide suitable link for installing it.
and I have one more question.
We getting waring message for Single Sign On and WEB Services Logical Port Creation in Managed System Configuration Step No. 8 Configure Automatically.
Shall we proceed with warning. or it needs to be fully performed without warning.
Please guide us.
Thanks & Regards,
Ishan
↧
↧
Solution Manager 7.1 installation: SAPINST vs. SWPM
Hello!
We would like to install SAP Solution Manager 7.1 SP8 on Windows 2008 R2 with Oracle.
Which installation software should be used therefore SAPINST or SWPM?
If SWPM, what are the advantages here?
Thank you!
↧
Solution Manager Diagnostics Agents
Hi,
I am on Solman 7.1 SP8 on Windows Cluster VM environment. I am trying to setup Technical monitoring and Diagnostics.
The problems is with the Diagnostics agents:
1.
[Thread[SLD-AssocWatcher,1,main] ] Error [SLDQueryBuilder] SLD check connection failed
[EXCEPTION]
com.sap.sld.api.wbem.exception.CIMCommunicationException: CIM_ERR_FAILED: HTTP response code: 503 Not Ready
** I have already Increased the parameters as per the section 'Scalability' in the Diagnostics Troubleshooting guide. Also, increased the number of concurrent registrations allowed from default value 10 and increased the number of threads.
2.
[EXCEPTION]
java.lang.ClassCastException: class com.sap.smd.api.ISMDAgentHandle_Stub:com.sap.smd.agent.loader.FileClassLoader@5f989f84
incompatible with interface javax.naming.Context:null
at com.sap.smd.agent.connection.SMDConnectionTask.unbindAgent(SMDConnectionTask.java:1359)
at com.sap.smd.agent.connection.SMDConnectionTask.internalAttemptConnection(SMDConnectionTask.java:724)
at com.sap.smd.agent.connection.SMDConnectionTask$1.run(SMDConnectionTask.java:107)
at com.sap.smd.agent.connection.P4JNDIContextHelper.executeInSecurityContext(P4JNDIContextHelper.java:148)
at com.sap.smd.agent.connection.SMDConnectionTask.attemptConnection(SMDConnectionTask.java:102)
at com.sap.smd.agent.connection.SMDConnectionTask.run(SMDConnectionTask.java:1271)
at java.lang.Thread.run(Thread.java:679)
3.
com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is java.io.EOFException: End of stream is reached unexpectedly during input from Socket
The Agents keep on randomly shutting down with these errors.
I have tried with the smdsetup scripts.
I am using the 'On the Fly' scenario.
I do not find any solutions for these errors.
Regards,
Kaustubh.
↧
Wily Enterprise Manager and SolMan 7.1 SP4
Hello,
we had a Solman 7.01 with a running Wily EM 8.2.3.5. We upgraded our SolMan to 7.1 SP4 and I would like to move to Wily EM 9.1.0.0. But I am running in some trouble - hope I can get some hints here:
1) Old EM was installed in /usr/sap/PS1/ccms/wilyintroscope. Wily_Introscope_V9_Installation_Guide_for_SAP.pdf tells me to install EM 9 to /usr/sap/ccms/apmintroscope. I did this successfully - EM is installed an running. But: When I call Introscope Workstation from Workcenter I get the message that all configured Enterprise Managers are offline. When I got the the url http://<solman>:8081/workstation?host=<solman>&port=6001 wily starts and I can see the triages etc.
So I think that something is wrong with my config but I can not get solman_setup to take my values - I tried "Import existing installation" a few times - without success. (Maybe I should install to the old directory wilyintrosope - but if it is changed there should be a reason [btw: what is the reason?] and I would like to follow the standard ...)
2) I saw that with SolMan 7.1 SP4 you can do a remote installation of wily EM. Did anybody succeed with that? I run in the problem that ca-eula.txt is not valid because it is not accepted - but definitly I changed reject to accept.
Thanks for any hints!
Frank E. Seidel
↧